Check out this lifting magnet with beam! It is for 3mm steel plate lifting. You don't have to worry about deformation or scratch of the steel plate. With 4 magnet modules, the lifting magnet with beam can effectively handle the steel plates and improve efficiency!
1. Previously, the customer used steel clamps and slings to handle the thin steel plate with a thickness of 3 mm. There were 4 or 5 workers working together to clamp the thin sheets one by one, taking 20~30 min each cycle. Sometimes, there would be scratches on the sheet surface. HVR MAG solved it with spring design on the magnet.
2. Although the steel sheet is not very heavy. But for lifting magnet, there's another question. That is the thin sheets lifting requires only one sheet lifted at a time, allowing no sticking of a second sheet below. HVR MAG technicians solved the problem by designing a lifting magnet with adjustable magnetic force.
A. All the above main problems solved. No sticking of the sheet, and no scratches on the surface.
B. Meet the customer's needs of saving manpower cost and improving lifting efficiency and productivity.
In conclusion, this lifting magnet with beam (yes, we can also produce lifting magnet without beam in some rare cases.) has now become an effective tool in our customer's workshop. If you need a lifting equipment customed to your specific working conditions, please never hesitate to contact us at: export@hvrmagnet.com
Work directly with our experienced team to solve your toughest engineering challenges