Steel I beams are very important in building and making things. They are heavy and need to be lifted safely. Lifting hooks and slings are not always safe and can cause accidents. HVR MAG wanted to solve this problem by making a better lifting magnet.
Background
A big construction company wanted a better way to lift steel I beams. They used hooks and slings before, which was not very safe.
The construction company tried the HVR electro permanent lifting magnets in a few projects and liked it. The long and thin poles made lifting easy, and the fine control helped move the beams without any problems.
Special Design of Lifting Magnet for I beam
- Long and Thin Magnetic Pole:
Lifting magnet specializing for I beam has a long and thin pole that makes it grip the beam very well. This helps keep the beam from slipping while lifting. The pole touches the beam’s surfaces perfectly, making sure it stays in place.
- Precise Magnetic Force Control:
This magnet has a control system that lets you adjust the magnetic force. This is very important when turning or moving the beam. With fine control, you can move the beam safely without it falling, making the job faster and safer.
- Battery Supply:
The lifting magnet works using a battery, not relaying on continuous electricity. This means you don’t need a power source all the time. The battery gives enough power for long use and makes the magnet easier to use in places where there is no electricity.
Results of New Lifting Magnet
Faster Work: The company found they could lift and move I beams much faster with the new magnet. They needed fewer workers and got the job done quicker.
Safer Lifting: The magnet made lifting safer. Workers had better control over the beams, and there were fewer accidents.
