Products
  • thin steel plate magnet lifter
  • Thin steel plate lifting magnet
  • EPM for thin steel plate
  • thin steel plate magnet lifter
  • Thin steel plate lifting magnet
  • EPM for thin steel plate

HVR MAG Electro Permanent Lifting Magnet for Thin Steel Plate

This special electro permanent lifting magnet is suitable for lifting steel plates thinner than 6mm, realizing lifting only one piece only in one cycle and the magnetic force could be regulated according to the specific condition.
Inquiry

HVR MAG specially designed this kind of electro permanent lifting magnet for thin steel plates. Even though the plate needs to be lifted is only 2-millimeter-thickness, enough magnetic force can still be generated. Special structure can guarantee each process only lifts one piece of plate and easily overcomes large deflection problems.

Advantages :

1. The lifting magnet for thin steel plate does not requires electrical energy during the working time; it only uses electricity in the MAG and DEMAG phase. The loads will not fall even if in the circumstances that power off or cables broken.

2. The HEPMB Series lifting magnet can realize that only one steel plate thinner than 6mm is lifted in a cycle.

3. Unique design of connecting the structures, making it easily adapt to the deformation of the steel plate without causing distortion or scratches to plates.

4. It can largely increase the efficiency and saves energy as it can be operated by one person in a short time and saves 95% electricity; maintenance free as there are no movable parts inside, which would not cause damage to the machine.

The HEPMB Series lifting magnets are commonly used for loading single steel sheet from stack, cutting line and single plate lifting in steel plate factory or docks and shipyard.

Product overall drawing



Model

Rated lifting

capacity (kg)

Thickness of

steel(mm)

Max
Dimension(mm)
Weight
Pull-off force(kg)
(kg)
A
B
C
D
E
h
H
HEPMP-100B
100
1.5~6
400
140
100
110
60
12
58
425
7
HEPMP-200B
200
2~10
800
260
100
180
50
16
58
425
12
HEPMP-300B
300
2~12
900
260
140
180
50
16
58
425
17
HEPMP-400B
400
2~12
1450
350
140
180
50
16
58
425
23
HEPMP-500B
500
2~12
1820
350
190
180
50
20
58
425
32
HEPMP-600B
600
2~12
2050
430
190
180
50
20
58
425
40


Main technical parameters

Note 1. The definition of rated lifting capacity for series EP magnets: Rated lifting capacity=The max.pull-off strength at 1.0mm working air-gap/1.5.

© HVR Magnetics Co.,Ltd., 2016